Restore smooth alternator operation with this 100% new aftermarket Denso 7-groove overrunning alternator pulley (OAP), designed for compatible Denso IR/IF alternators. Featuring a 55 mm rib outside diameter, 17 mm bore, M14 x 1.5 threads, and 25 mm belt width, this replacement pulley helps reduce accessory belt vibration, minimize belt drive noise, and support reliable alternator performance.
Designed for select Toyota Camry, Corolla, Matrix, RAV4, Scion xB, and Pontiac Vibe applications equipped with compatible 2.4L engines. Ideal for alternator rebuilding and repair, this pulley is compatible with Lester numbers 11195, 11201, and 23996 and cross-referenced to INA and Toyota part numbers.
Product Type: Alternator Clutch Pulley
Manufacturer: Aftermarket Replacement for Denso
Alternator Manufacturer: Denso
Alternator Series: Denso IR/IF
Pulley Type: Overrunning Alternator Pulley (OAP)
Number of Grooves: 7
Belt Width: 25 mm
Rib Outside Diameter: 55 mm
Shaft Bore: 17 mm
Thread Size: M14 x 1.5
Hub to Center of First Groove: 8.5 mm
Dimension A: 17 mm
Dimension B: 55 mm
Dimension C: 50 mm
Dimension D: 8.5 mm
Condition: 100% New
Application: Alternator Rebuilding and Repair
11195, 11201, 23996
INA Bearing Co:
535 0198 10
Toyota:
27415-0W040, 27415-0W041, 27415-0W042
Denso:
104210-4790, 104210-4791, 104210-4792, 104210-4793, 104210-4794, 104210-4795, 104210-4810, 104210-4811, 104210-4880, 104210-4881, 104210-4980, 104210-4981, 104210-4982, 104210-4983, 104210-4984, 104210-4985
General Motors (GM):
88975511
Scion:
27060-28320, 27060-28321, 27060-28321-84
Toyota:
27060-0H110, 27060-0H111, 27060-0H111-84, 27060-28300, 27060-28301, 27060-28301-84, 27060-2830184, 27060-28320, 27060-28321, 27060-28321-84, 27060-28340, 27060-28341
| Make | Model | Year | Engine |
|---|---|---|---|
| Pontiac | Vibe | 2009–2010 | L4 2.4L 2362cc |
| Scion | xB | 2008–2015 | L4 2.4L 2362cc |
| Toyota - Europe | Camry | 2001–2004 | 2400, 2AZ-FE |
| Toyota | Camry | 2007–2009 | L4 2.4L 2362cc |
| Toyota | Corolla | 2009–2012 | L4 2.4L 2362cc |
| Toyota | Matrix | 2009–2013 | L4 2.4L 2362cc |
| Toyota | RAV4 | 2006–2008 | L4 2.4L 2362cc |
Fitment Note: Verify the original alternator number, Lester number, Denso IR/IF alternator series, 7-groove OAP design, 55 mm rib outside diameter, 17 mm bore, M14 x 1.5 threads, OEM cross-reference numbers, and product photos before ordering. Vehicle compatibility may vary depending on engine configuration, alternator equipment, production year, and regional specifications.
Precision aftermarket replacement clutch / decoupler pulley for compatible alternators
Helps maintain smooth and efficient alternator drive operation
Designed to reduce excessive accessory belt vibration and unwanted noise
Helps minimize sudden belt loading during engine speed changes
Supports proper operation of the alternator and accessory belt drive system
Designed to replace worn, damaged, or malfunctioning alternator pulleys
Manufactured for dependable fit, performance, and long service life
Ideal for professional rebuilders, automotive repair shops, and DIY technicians
Suitable for alternator rebuilding, maintenance, and repair
Cross-referenced to OEM and aftermarket alternator part numbers for easier identification
An alternator clutch / decoupler pulley is a mechanical drive component that transfers rotational power from the engine's accessory belt to the alternator while helping manage changes in rotational speed and belt tension.
Unlike a conventional solid alternator pulley, an overrunning clutch pulley (OAP) incorporates a one-way clutch mechanism that allows the alternator rotor to continue rotating when engine speed decreases. This helps reduce sudden belt loading, vibration, and unnecessary stress on the accessory drive system.
An overrunning decoupler pulley (OAD) provides a similar overrunning function while incorporating a torsional spring mechanism that helps absorb engine speed fluctuations and reduce belt vibration.
A worn, seized, or malfunctioning clutch / decoupler pulley can contribute to excessive belt movement, abnormal tensioner operation, unwanted noise, or premature wear of related accessory drive components. Replacing a faulty pulley during alternator servicing can help restore proper pulley operation and support reliable accessory belt performance.
Clutch and decoupler pulley designs vary by alternator manufacturer and series. Always verify the pulley type, specifications, and compatibility before ordering.
Consider inspecting or replacing the clutch / decoupler pulley if you notice:
Excessive serpentine belt vibration or flutter
Unusual rattling, chirping, or squealing noises near the alternator
Excessive belt tensioner movement during engine operation
Pulley seized or locked in both directions when tested according to its design
Pulley slipping or failing to engage properly
Grinding, rattling, or abnormal mechanical noise from the pulley
Excessive pulley wobble or noticeable mechanical play
Premature serpentine belt or tensioner wear
Visible cracks, damage, or deterioration of the pulley assembly
Irregular accessory belt operation during acceleration or deceleration
Note: These symptoms may also be caused by worn belts, tensioners, bearings, or other accessory drive components. Proper diagnosis is recommended before replacement.
Installation should be performed by a qualified technician or experienced alternator rebuilder. Before replacing the clutch / decoupler pulley, disconnect the battery and inspect the alternator shaft, accessory belt, belt tensioner, mounting hardware, and surrounding drive components for damage or deterioration.
Inspect the original pulley for excessive wear, mechanical play, seized operation, or damage to the clutch or decoupling mechanism. Use the appropriate alternator pulley removal and installation tools to prevent damage to the alternator shaft and internal components.
Ensure the replacement pulley matches the original pulley type, groove count, outside diameter, shaft connection, thread specifications, and rotational characteristics. Overrunning clutch pulleys and overrunning decoupler pulleys are not automatically interchangeable.
Always verify the Lester number, OEM alternator number, alternator series, pulley specifications, cross-reference numbers, and product photos before ordering. Follow the applicable manufacturer's installation and torque specifications.
After installation and reassembly, inspect pulley alignment, verify proper belt operation, and bench-test the alternator to confirm charging output and overall operation before returning it to service.
When replacing an alternator clutch / decoupler pulley, consider inspecting other components that may require replacement:
Important: Components listed above are inspection recommendations and are sold separately unless specifically stated otherwise in the product description.
R&C AUTO ELECTRIC PARTS specializes in alternator and starter rebuilding components for professional rebuilders, repair shops, automotive technicians, and DIY enthusiasts. Our extensive catalog includes thousands of OEM and aftermarket electrical components backed by detailed specifications and cross-reference information to help simplify part identification and reduce ordering mistakes.
Compatibility information is provided as a reference only. Manufacturing revisions, production changes, and previous rebuilding modifications may affect alternator clutch / decoupler pulley compatibility. Always compare the Lester number, OEM alternator number, alternator series, pulley type, groove count, outside diameter, shaft connection, specifications, cross-reference numbers, and product photographs before ordering.
Overrunning clutch pulleys (OAP) and overrunning decoupler pulleys (OAD) are different designs and should not be considered interchangeable unless specifically approved for the application.
This listing is for the aftermarket alternator clutch / decoupler pulley only unless otherwise specified in the product description. If you are unsure about compatibility or product specifications, contact R&C AUTO ELECTRIC PARTS before ordering.
